Knowledge
Home > Knowledge > Content
Basic principles of terminal block design
- Nov 02, 2018 -

1) The contact position between the terminal and the sub-board and the displacement of the terminal are recommended before the design, which can help the design analysis of the later stage and determine the selection of the material of the terminal.

2) The parts supplier should be determined as soon as possible and can be referenced and discussed during the design process.

3) The terminal arm should be of appropriate length, so that similar positive force values and similar stress values can be obtained between the terminals, so that the service life of all terminals is as close as possible.

4) The terminal design is simple and clear, and the problem tracking is easy to control.

5) The width of the plastic slot can be controlled and adjusted, which can be used as the maximum displacement control of the terminal and achieve the function of protecting the terminal.


Previous: Connector manufacturing requirements

Next: No Information