News
Home > News > Content
Assembly Of Pots And PCBs
- Nov 02, 2018 -

1. Assembling the station, the assembly needs to be placed on the PCB after the PCB is finished, because the maximum temperature that PET can pass is 100° and the limit temperature is 120°.

2, the PCB surface should be cleaned before assembly (recommended to use water to wipe, also known as: white oil).

3. The operator must bring a finger cot when tearing the pot patch, and the environment must be kept clean.

4. It is recommended to use a simple fixture to align the position to ensure that the tile is not biased and can also improve production efficiency.